Repository mirroring (FREE)

Repository mirroring allows for mirroring of repositories to and from external sources. It can be used to mirror branches, tags, and commits between repositories. It is useful when you want to use a repository outside of GitLab.

A repository mirror at GitLab will be updated automatically. You can also manually trigger an update at most once every 5 minutes on GitLab.com with the limit set by the administrator on self-managed instances.

There are two kinds of repository mirroring supported by GitLab:

Push: for mirroring a GitLab repository to another location. (FREE)
Pull: for mirroring a repository from another location to GitLab. (PREMIUM)

When the mirror repository is updated, all new branches, tags, and commits will be visible in the project's activity feed.

Users with at least Developer access to the project can also force an immediate update, unless:

The mirror is already being updated.
The limit for pull mirroring interval seconds has not elapsed since its last update.

For security reasons, the URL to the original repository is only displayed to users with Maintainer or Owner permissions to the mirrored project.

Use cases

The following are some possible use cases for repository mirroring:

You migrated to GitLab but still need to keep your project in another source. In that case, you can simply set it up to mirror to GitLab (pull) and all the essential history of commits, tags, and branches will be available in your GitLab instance. (PREMIUM)
You have old projects in another source that you don't use actively anymore, but don't want to remove for archiving purposes. In that case, you can create a push mirror so that your active GitLab repository can push its changes to the old location.
You are a GitLab self-managed user for privacy reasons and your instance is closed to the public, but you still have certain software components that you want open sourced. In this case, utilizing GitLab to be your primary repository which is closed from the public, and using push mirroring to a GitLab.com repository that's public, allows you to open source specific projects and contribute back to the open source community.

Pushing to a remote repository (FREE)

Introduced in GitLab Enterprise Edition 8.7.

Moved to GitLab Free in 10.8.

LFS support over HTTPS added in 13.5

For an existing project, you can set up push mirroring as follows:

Navigate to your project's Settings > Repository and expand the Mirroring repositories section.
Enter a repository URL.
Select Push from the Mirror direction dropdown.
Select an authentication method from the Authentication method dropdown. You can authenticate with either a password or an SSH key.
Check the Only mirror protected branches box, if necessary.
Check the Keep divergent refs box, if desired.
Click the Mirror repository button to save the configuration.

When push mirroring is enabled, only push commits directly to the mirrored repository to prevent the mirror diverging. All changes will end up in the mirrored repository whenever:

Commits are pushed to GitLab.
A forced update is initiated.

Changes pushed to files in the repository are automatically pushed to the remote mirror at least:

Within five minutes of being received.
Within one minute if Only mirror protected branches is enabled.

In the case of a diverged branch, you will see an error indicated at the Mirroring repositories section.

Configuring push mirrors through the API

You can also create and modify project push mirrors through the remote mirrors API.

Keep divergent refs

Introduced in GitLab 13.0.

By default, if any ref on the remote mirror has diverged from the local repository, the entire push will fail, and nothing will be updated.

For example, if a repository has master, develop, and stable branches that have been mirrored to a remote, and then a new commit is added to develop on the mirror, the next push attempt will fail, leaving master and stable out-of-date despite not having diverged. No change on any branch can be mirrored until the divergence is resolved.

With the Keep divergent refs option enabled, the develop branch is skipped, allowing master and stable to be updated. The mirror status will reflect that develop has diverged and was skipped, and be marked as a failed update.

NOTE: After the mirror is created, this option can currently only be modified via the API.

Setting up a push mirror from GitLab to GitHub

To set up a mirror from GitLab to GitHub, you need to follow these steps:

Create a GitHub personal access token with the public_repo box checked.
Fill in the Git repository URL field using this format: https://<your_github_username>@github.com/<your_github_group>/<your_github_project>.git.
Fill in Password field with your GitHub personal access token.
Click the Mirror repository button.

The mirrored repository will be listed. For example, https://*****:*****@github.com/<your_github_group>/<your_github_project>.git.

The repository will push soon. To force a push, click the Update now ({retry}) button.

Setting up a push mirror from GitLab to AWS CodeCommit

AWS CodeCommit push mirroring is currently the best way to connect GitLab repositories to AWS CodePipeline, as GitLab is not yet supported as one of their Source Code Management (SCM) providers.

Each new AWS CodePipeline needs significant AWS infrastructure setup. It also requires an individual pipeline per branch.

If AWS CodeDeploy is the final step of a CodePipeline, you can, instead, leverage GitLab CI/CD pipelines and simply use the AWS CLI in the final job in .gitlab-ci.yml to deploy to CodeDeploy.

NOTE: GitLab-to-AWS-CodeCommit push mirroring cannot use SSH authentication until GitLab issue 34014 is resolved.

To set up a mirror from GitLab to AWS CodeCommit:

In the AWS IAM console, create an IAM user.

Add the following least privileges permissions for repository mirroring as an "inline policy".

The Amazon Resource Names (ARNs) must explicitly include the region and account. The IAM policy below grants privilege for mirroring access to two sample repositories. These permissions have been tested to be the minimum (least privileged) required for mirroring:

{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Sid": "MinimumGitLabPushMirroringPermissions",
            "Effect": "Allow",
            "Action": [
                "codecommit:GitPull",
                "codecommit:GitPush"
            ],
            "Resource": [
              "arn:aws:codecommit:us-east-1:111111111111:MyDestinationRepo",
              "arn:aws:codecommit:us-east-1:111111111111:MyDemo*"
            ]
        }
    ]
}

After the user was created, click the AWS IAM user name.
Click the Security credentials tab.
Under HTTPS Git credentials for AWS CodeCommit click Generate credentials.

NOTE: This Git user ID and password is specific to communicating with CodeCommit. Do not confuse it with the IAM user ID or AWS keys of this user.
Copy or download special Git HTTPS user ID and password.
In the AWS CodeCommit console, create a new repository to mirror from your GitLab repository.
Open your new repository and click Clone URL > Clone HTTPS (not Clone HTTPS (GRC)).
In GitLab, open the repository to be push-mirrored.
Click Settings > Repository and expand Mirroring repositories.
Fill in the Git repository URL field using this format:
```
https://<your_aws_git_userid>@git-codecommit.<aws-region>.amazonaws.com/v1/repos/<your_codecommit_repo>
```
Replace <your_aws_git_userid> with the AWS special HTTPS Git user ID from the IAM Git credentials created earlier. Replace <your_codecommit_repo> with the name of your repository in CodeCommit.
For Mirror direction, select Push.
For Authentication method, select Password and fill in the Password field with the special IAM Git clone user ID password created earlier in AWS.
The option Only mirror protected branches should be good for CodeCommit as it pushes more frequently (from every five minutes to every minute). CodePipeline requires individual pipeline setups for named branches you wish to have a AWS CI setup for. Since feature branches that have dynamic names will not be supported anyway, configuring Only mirror protected branches does not cause flexibility problems with CodePipeline integration as long as you are also willing to protect all the named branches you want to build CodePipelines for.

Click Mirror repository. You should see the mirrored repository appear:

https://*****:*****@git-codecommit.<aws-region>.amazonaws.com/v1/repos/<your_codecommit_repo>

To test mirroring by forcing a push, click the half-circle arrows button (hover text is Update now). If Last successful update shows a date, you have configured mirroring correctly. If it is not working correctly a red error tag appears and shows the error message as hover text.

Setting up a push mirror to another GitLab instance with 2FA activated

On the destination GitLab instance, create a personal access token with write_repository scope.
On the source GitLab instance:
1. Fill in the Git repository URL field using this format: https://oauth2@<destination host>/<your_gitlab_group_or_name>/<your_gitlab_project>.git.
2. Fill in the Password field with the GitLab personal access token created on the destination GitLab instance.
3. Click the Mirror repository button.

Pulling from a remote repository (PREMIUM)

Introduced in GitLab Enterprise Edition 8.2.

Added Git LFS support in GitLab 11.11.

Moved to GitLab Premium in 13.9.

You can set up a repository to automatically have its branches, tags, and commits updated from an upstream repository.

This is useful when a repository you're interested in is located on a different server, and you want to be able to browse its content and its activity using the familiar GitLab interface.

To configure mirror pulling for an existing project:

Navigate to your project's Settings > Repository and expand the Mirroring repositories section.
Enter a repository URL.
Select Pull from the Mirror direction dropdown.
Select an authentication method from the Authentication method dropdown, if necessary.
If necessary, check the following boxes:
- Overwrite diverged branches.
- Trigger pipelines for mirror updates.
- Only mirror protected branches.
Click the Mirror repository button to save the configuration.

Because GitLab is now set to pull changes from the upstream repository, you should not push commits directly to the repository on GitLab. Instead, any commits should be pushed to the remote repository. Changes pushed to the remote repository will be pulled into the GitLab repository, either:

Automatically within a certain period of time.
When a forced update is initiated.

WARNING: If you do manually update a branch in the GitLab repository, the branch will become diverged from upstream and GitLab will no longer automatically update this branch to prevent any changes from being lost. Also note that deleted branches and tags in the upstream repository will not be reflected in the GitLab repository.

How it works

Once the pull mirroring feature has been enabled for a repository, the repository is added to a queue.

Once per minute, a Sidekiq cron job schedules repository mirrors to update, based on:

The capacity available. This is determined by Sidekiq settings. For GitLab.com, see GitLab.com Sidekiq settings.
The number of repository mirrors already in the queue that are due to be updated. Being due depends on when the repository mirror was last updated and how many times it's been retried.

Repository mirrors are updated as Sidekiq becomes available to process them. If the process of updating the repository mirror:

Succeeds, an update will be enqueued again with at least a 30 minute wait.
Fails (for example, a branch diverged from upstream), it will be attempted again later. Mirrors can fail up to 14 times before they will not be enqueued for update again.

Overwrite diverged branches (PREMIUM)

Introduced in GitLab 10.6.

Moved to GitLab Premium in 13.9.

You can choose to always update your local branches with remote versions, even if they have diverged from the remote.

WARNING: For mirrored branches, enabling this option results in the loss of local changes.

To use this option, check the Overwrite diverged branches box when creating a repository mirror.

Trigger pipelines for mirror updates (PREMIUM)

Moved to GitLab Premium in 13.9.

If this option is enabled, pipelines will be triggered when branches or tags are updated from the remote repository. Depending on the activity of the remote repository, this may greatly increase the load on your CI runners. Only enable this if you know they can handle the load. CI will run using the credentials assigned when you set up pull mirroring.

Hard failure (PREMIUM)

Introduced in GitLab 10.2.

Moved to GitLab Premium in 13.9.

Once the mirroring process is unsuccessfully retried 14 times in a row, it will get marked as hard failed. This will become visible in either the:

Project's main dashboard.
Pull mirror settings page.

When a project is hard failed, it will no longer get picked up for mirroring. You can resume the project mirroring again by forcing an update.

Trigger an update using the API (PREMIUM)

Introduced in GitLab 10.3.

Moved to GitLab Premium in 13.9.

Pull mirroring uses polling to detect new branches and commits added upstream, often minutes afterwards. If you notify GitLab by API, updates will be pulled immediately.

For more information, see Start the pull mirroring process for a Project.

Mirror only protected branches (PREMIUM)

Moved to GitLab Premium in 13.9.

Based on the mirror direction that you choose, you can opt to mirror only the protected branches from/to your remote repository. For pull mirroring, non-protected branches are not mirrored and can diverge.

To use this option, check the Only mirror protected branches box when creating a repository mirror. (PREMIUM)

SSH authentication

Introduced in GitLab 9.5 for Pull mirroring.

Introduced in GitLab 11.6 for Push mirroring.

SSH authentication is mutual:

You have to prove to the server that you're allowed to access the repository.
The server also has to prove to you that it's who it claims to be.

You provide your credentials as a password or public key. The server that the other repository resides on provides its credentials as a "host key", the fingerprint of which needs to be verified manually.

If you're mirroring over SSH (that is, using an ssh:// URL), you can authenticate using:

Password-based authentication, just as over HTTPS.
Public key authentication. This is often more secure than password authentication, especially when the other repository supports deploy keys.

To get started:

Navigate to your project's Settings > Repository and expand the Mirroring repositories section.
Enter an ssh:// URL for mirroring.

NOTE: SCP-style URLs (that is, git@example.com:group/project.git) are not supported at this time.

Entering the URL adds two buttons to the page:

Detect host keys.
Input host keys manually.

If you click the:

Detect host keys button, GitLab will fetch the host keys from the server and display the fingerprints.
Input host keys manually button, a field is displayed where you can paste in host keys.

Assuming you used the former, you now need to verify that the fingerprints are those you expect. GitLab.com and other code hosting sites publish their fingerprints in the open for you to check:

Other providers will vary. If you're running self-managed GitLab, or otherwise have access to the server for the other repository, you can securely gather the key fingerprints:

$ cat /etc/ssh/ssh_host*pub | ssh-keygen -E md5 -l -f -
256 MD5:f4:28:9f:23:99:15:21:1b:bf:ed:1f:8e:a0:76:b2:9d root@example.com (ECDSA)
256 MD5:e6:eb:45:8a:3c:59:35:5f:e9:5b:80:12:be:7e:22:73 root@example.com (ED25519)
2048 MD5:3f:72:be:3d:62:03:5c:62:83:e8:6e:14:34:3a:85:1d root@example.com (RSA)

NOTE: You may need to exclude -E md5 for some older versions of SSH.

When mirroring the repository, GitLab will now check that at least one of the stored host keys matches before connecting. This can prevent malicious code from being injected into your mirror, or your password being stolen.

SSH public key authentication

To use SSH public key authentication, you'll also need to choose that option from the Authentication method dropdown. When the mirror is created, GitLab generates a 4096-bit RSA key that can be copied by clicking the Copy SSH public key button.

You then need to add the public SSH key to the other repository's configuration:

If the other repository is hosted on GitLab, you should add the public SSH key as a deploy key.
If the other repository is hosted elsewhere, you may need to add the key to your user's authorized_keys file. Paste the entire public SSH key into the file on its own line and save it.

If you need to change the key at any time, you can remove and re-add the mirror to generate a new key. You'll have to update the other repository with the new key to keep the mirror running.

NOTE: The generated keys are stored in the GitLab database, not in the file system. Therefore, SSH public key authentication for mirrors cannot be used in a pre-receive hook.

Forcing an update (FREE)

While mirrors are scheduled to update automatically, you can always force an update by using the update button which is available on the Mirroring repositories section of the Repository Settings page.

Bidirectional mirroring (PREMIUM)

Moved to GitLab Premium in 13.9.

WARNING: Bidirectional mirroring may cause conflicts.

If you configure a GitLab repository to both pull from, and push to, the same remote source, there is no guarantee that either repository will update correctly. If you set up a repository for bidirectional mirroring, you should prepare for the likely conflicts by deciding who will resolve them and how they will be resolved.

Rewriting any mirrored commit on either remote will cause conflicts and mirroring to fail. This can be prevented by mirroring only protected branches.

You should protect the branches you wish to mirror on both remotes to prevent conflicts caused by rewriting history.

Bidirectional mirroring also creates a race condition where commits made close together to the same branch causes conflicts. The race condition can be mitigated by reducing the mirroring delay by using a Push event webhook to trigger an immediate pull to GitLab. Push mirroring from GitLab is rate limited to once per minute when only push mirroring protected branches.

Configure a webhook to trigger an immediate pull to GitLab

Assuming you have already configured the push and pull mirrors in the upstream GitLab instance, to trigger an immediate pull as suggested above, you will need to configure a Push Event Web Hook in the downstream instance.

To do this:

Create a personal access token with API scope.
Navigate to Settings > Webhooks
Add the webhook URL which in this case will use the Pull Mirror API request to trigger an immediate pull after updates to the repository.
```
https://gitlab.example.com/api/v4/projects/:id/mirror/pull?private_token=<your_access_token>
```
Ensure that the Push Events checkbox is selected.
Click on Add Webhook button to save the webhook.
To test the integration click on the Test button and confirm GitLab does not return any error.

Preventing conflicts using a `pre-receive` hook

WARNING: The solution proposed will negatively impact the performance of Git push operations because they will be proxied to the upstream Git repository.

A server-side pre-receive hook can be used to prevent the race condition described above by only accepting the push after first pushing the commit to the upstream Git repository. In this configuration one Git repository acts as the authoritative upstream, and the other as downstream. The pre-receive hook will be installed on the downstream repository.

Read about configuring Server hooks on the GitLab server.

A sample pre-receive hook is provided below.

#!/usr/bin/env bash

# --- Assume only one push mirror target
# Push mirroring remotes are named `remote_mirror_<id>`, this finds the first remote and uses that.
TARGET_REPO=$(git remote | grep -m 1 remote_mirror)

proxy_push()
{
  # --- Arguments
  OLDREV=$(git rev-parse $1)
  NEWREV=$(git rev-parse $2)
  REFNAME="$3"

  # --- Pattern of branches to proxy pushes
  allowlist=$(expr "$branch" : "\(master\)")

  case "$refname" in
    refs/heads/*)
      branch=$(expr "$refname" : "refs/heads/\(.*\)")

      if [ "$allowlist" = "$branch" ]; then
        unset GIT_QUARANTINE_PATH # handle https://git-scm.com/docs/git-receive-pack#_quarantine_environment
        error="$(git push --quiet $TARGET_REPO $NEWREV:$REFNAME 2>&1)"
        fail=$?

        if [ "$fail" != "0" ]; then
          echo >&2 ""
          echo >&2 " Error: updates were rejected by upstream server"
          echo >&2 "   This is usually caused by another repository pushing changes"
          echo >&2 "   to the same ref. You may want to first integrate remote changes"
          echo >&2 ""
          return
        fi
      fi
      ;;
  esac
}

# Allow dual mode: run from the command line just like the update hook, or
# if no arguments are given then run as a hook script
if [ -n "$1" -a -n "$2" -a -n "$3" ]; then
  # Output to the terminal in command line mode - if someone wanted to
  # resend an email; they could redirect the output to sendmail
  # themselves
  PAGER= proxy_push $2 $3 $1
else
  # Push is proxied upstream one ref at a time. Because of this it is possible
  # for some refs to succeed, and others to fail. This will result in a failed
  # push.
  while read oldrev newrev refname
  do
    proxy_push $oldrev $newrev $refname
  done
fi

Note that this sample has a few limitations:

This example may not work verbatim for your use case and might need modification.
- It does not regard different types of authentication mechanisms for the mirror.
- It does not work with forced updates (rewriting history).
- Only branches that match the allowlist patterns will be proxy pushed.
The script circumvents the Git hook quarantine environment because the update of $TARGET_REPO is seen as a ref update and Git will complain about it.

Mirroring with Perforce Helix via Git Fusion (PREMIUM)

Moved to GitLab Premium in 13.9.

WARNING: Bidirectional mirroring should not be used as a permanent configuration. Refer to Migrating from Perforce Helix for alternative migration approaches.

Git Fusion provides a Git interface to Perforce Helix which can be used by GitLab to bidirectionally mirror projects with GitLab. This may be useful in some situations when migrating from Perforce Helix to GitLab where overlapping Perforce Helix workspaces cannot be migrated simultaneously to GitLab.

If using mirroring with Perforce Helix, you should only mirror protected branches. Perforce Helix will reject any pushes that rewrite history. Only the fewest number of branches should be mirrored due to the performance limitations of Git Fusion.

When configuring mirroring with Perforce Helix via Git Fusion, the following Git Fusion settings are recommended:

change-pusher should be disabled. Otherwise, every commit will be rewritten as being committed by the mirroring account, rather than being mapped to existing Perforce Helix users or the unknown_git user.
unknown_git user will be used as the commit author if the GitLab user does not exist in Perforce Helix.

Read about Git Fusion settings on Perforce.com.

Troubleshooting

Should an error occur during a push, GitLab will display an "Error" highlight for that repository. Details on the error can then be seen by hovering over the highlight text.

13:Received RST_STREAM with error code 2 with GitHub

If you receive an "13:Received RST_STREAM with error code 2" while mirroring to a GitHub repository, your GitHub settings might be set to block pushes that expose your email address used in commits. Either set your email address on GitHub to be public, or disable the Block command line pushes that expose my email setting.

4:Deadline Exceeded

When upgrading to GitLab 11.11.8 or newer, a change in how usernames are represented means that you may need to update your mirroring username and password to ensure that %40 characters are replaced with @.

Repository mirroring (FREE)

Use cases

Pushing to a remote repository (FREE)

Configuring push mirrors through the API

Keep divergent refs

Setting up a push mirror from GitLab to GitHub

Setting up a push mirror from GitLab to AWS CodeCommit

Setting up a push mirror to another GitLab instance with 2FA activated

Pulling from a remote repository (PREMIUM)

How it works

Overwrite diverged branches (PREMIUM)

Trigger pipelines for mirror updates (PREMIUM)

Hard failure (PREMIUM)

Trigger an update using the API (PREMIUM)

Mirror only protected branches (PREMIUM)

SSH authentication

SSH public key authentication

Forcing an update (FREE)

Bidirectional mirroring (PREMIUM)

Configure a webhook to trigger an immediate pull to GitLab

Preventing conflicts using a pre-receive hook

Mirroring with Perforce Helix via Git Fusion (PREMIUM)

Troubleshooting

13:Received RST_STREAM with error code 2 with GitHub

4:Deadline Exceeded

Preventing conflicts using a `pre-receive` hook